The European Commission has submitted to member states a new draft of sanctions against Russia, including an oil embargo. Some member states that rely heavily on Russian energy sought exemptions.
Western media reported that the European Commission draft of the sixth round of sanctions against Russia includes within six to eight months gradually banning oil imports from Russia, but allowing Hungary and Slovakia to extend the transition period for several months; The Russian Savings bank and other large financial institutions on the sanctions list.
The European Union has imported 44 billion euros of fossil fuels from Russia since Russia launched its special military operation against Ukraine in late February, according to Finland's Energy and Clean Air Research Center.
The Institute for European and Global Economics in Brussels estimates that the European Union currently consumes about $450 million worth of Russian oil a day.
Among EU members, landlocked Hungary and Slovakia, which import most of their oil from Russia, cannot quickly find alternative supplies. Slovakia says the transition will take years. Some officials believe Bulgaria and the Czech Republic may also seek to opt out of oil sanctions against Russia.
Affected by the ever-changing international situation, the supply and prices of international bulk MoSi2 Powder are still very uncertain.
Introduction to Molybdenum Silicide MoSi2 Powder
Molybdenum silicide was discovered in 1906. Under different conditions, silicon and molybdenum can form molybdenum trisilicide (Mo3Si), molybdenum pentasilicate (Mo5Si3), and molybdenum disilicate (MoSi2). The most important one is the Molybdenum disilicide (MoSi2), which is a Dalton-type intermetallic compound. The atomic combination in its crystal structure shows the coexistence of metal bonds and covalent bonds, and has excellent high-temperature essential characteristics.
Molybdenum disilicide is an inorganic compound, the chemical formula is MoSi2, gray metal solid. Insoluble in most acids, but soluble in nitric acid and hydrofluoric acid. The two kinds of atoms have similar radii and electronegativity, which is similar to metal and ceramic. Molybdenum disilicide is electrically conductive and at high temperatures forms a passivation layer of silicon dioxide on the surface to prevent further oxidation.
It can be applied as high-temperature oxidation-resistant coating materials, electric heating elements, integrated electrode film, structural materials, composite reinforcement, wear-resistant materials, structural ceramics, and other fields of bonding materials.
Physicochemical Properties of Molybdenum Silicide MoSi2 Powder
MoSi2 is a kind of intermediate phase with the highest silicon content in the Mo-Si binary alloy system, and it is a Dalton-type intermetallic compound with a fixed composition. It has dual characteristics of metal and ceramic, and is a kind of high-temperature material with excellent performance. Good high-temperature oxidation resistance, oxidation resistance temperature up to 1600℃, and SiC equivalent; Moderate density (6.24g/cm3); Low thermal expansion coefficient (8.1×10-6K-1); Good electric conductivity; Higher brittle and ductile transition temperature (1000℃) below the hard brittleness of ceramics. Above 1000℃ it is metal-like soft plastic. MoSi2 is mainly used as heating elements, integrated circuits, high-temperature oxidation-resistant coating, and high-temperature structural material.
In MoSi2, molybdenum and silicon are bonded by metal bonds, while silicon and silicon are bonded by covalent bonds. Molybdenum disilicide is gray tetragonal crystal. Insoluble in general mineral acids (including aqua roya), but soluble in nitric acid and hydrofluoric acid mixed acid, has good high-temperature oxidation resistance, can be used as high temperature (<1700℃) oxidation atmosphere work heating element.
In an oxidizing atmosphere, a protective film is formed on the surface of dense quartz glass (SiO2) burned at a high temperature to prevent continuous oxidation. When the temperature of the heating element is higher than 1700℃, SiO2 protective film is formed, which is thickened at the melting point of 1710℃ and fused with SiO2 into molten droplets. It loses its protective ability due to its surface-extending action. When the element is used continuously under the oxidant, it forms a protective film again. It should be noted that this element cannot be used for long periods at 400-700℃ due to strong oxidation at low temperatures.
|Molybdenum Silicide MoSi2 Powder Properties|
|Other Names||molybdenum disilicide, MoSi2 powder|
|Appearance||gray to black powder|
|Melting Point||1900-2050 °C|
|Solubility in H2O||N/A|
Applications of Molybdenum Silicide MoSi2 Powder
MoSi2 is widely used in heating elements. Molybdenum disilicide heating elements can be used at temperatures up to 1800°C for electric furnaces used in laboratories and production environments in glass, steel, electronics, ceramics, and for heat treatment of materials. Although these components are brittle, they can operate at high power without aging, and their resistivity does not increase with operating time.
Main Supplier of Molybdenum Silicide MoSi2 Powder
Luoyang Tongrun Nano Technology Co. Ltd. (TRUNNANO) is a trusted global chemical material supplier & manufacturer with over 12-year-experience in providing super high-quality chemicals and Nanomaterials, including silicon powder, nitride powder, graphite powder, zinc sulfide, calcium nitride, 3D printing powder, etc.
If you are looking for high-quality molybdenum silicide MoSi2 powder, please feel free to contact us and send an inquiry. ([email protected])
Due to the impact of COVID-19, russia-Ukraine conflict and international trade friction, the global economy is facing great challenges. Overseas trade is shrinking, supply chains are not smooth, oil prices are rising, freight rates are rising, and global trade and economic recovery are becoming more uncertain, which brings many risks and challenges to the company's business. The price of the MoSi2 Powder can also be influenced by the above factors. To get the price of the latest MoSi2 Powder, you are welcome to send email contact.
Silicon nitride is known as Si3N4 powder, it's a super-hard substance, which has lubricity itself, and is resistant to wear and oxidation at high temperatures.…
Copper oxide,chemical formula CuO. It is a black oxide of copper,slightly amphoteric and slightly hygroscopic.The relative molecular mass is 79.545,the density is 6.3～6.9 g/cm3,and the melting point is 1026℃.…
Sodium myristate is ultra fine white powder, it has excellent lubricating, dispersing and emulsifying ability.…